5 MANAGING PRINT JOBS FROM THE CONTROL PANEL
158 Monitoring the Print Job Status
11
Press [OK].
The equipment starts printing. The printouts are directed to the receiving tray.
The job in progress can be monitored from the [JOBS] tab listing the Normal Print jobs.
Before Disconnecting the USB Storage Device:
Make sure that “USB DEVICE in use Do not remove USB DEVICE” is not displayed on the touch panel. If it is, do
not disconnect the USB storage device; removing the device while the message is displayed could destroy the data
in the device or cause a malfunction of the equipment.
To Next Page
Loading...
