2.PRINTING FROM WINDOWS
Setting Up Print Options 33
2 PRINTING FROM WINDOWS
2) Page Order
Select this to print the pages from left to right or right to left.
3) Margin - Center
This sets the gutter on the center of two sided page. You can enter up to 0.50 inch (12.70 mm). The printed images
will be reduced according to the margin setting.
4) Margin - Outer
This sets the gutter on the right side and left side on the paper. You can enter up to 1.00 inch (25.40 mm). The printed
images will be reduced according to the margin setting.
5) Units
Select the unit for the Center Margin and Outer Margin option. The default unit varies depending on the regional
setting in the Windows.
6) Staple Down the Center
Check this to double staple in the center.
[Staple Down the Center] is available only when [A5 on A4], [A4 on A3], [B5 on B4], [Letter - Half on Letter], [LT on
LD], or [1/2 LG on LG] is selected at the [Output Document Layout] box and the Saddle Stitch Finisher (optional) is
installed.
For the detailed instructions on how to print with the [Booklet] setting, see the following page:
P.69 “Making a Booklet”
To Next Page
Loading...
