EasyManua.ls Logo

Toshiba e-STUDIO 2830c - Paper Jam in the Reversing Automatic Document Feeder (Optional)

Toshiba e-STUDIO 2830c
122 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam 13
1 TROUBLESHOOTING FOR THE HARDWARE
If paper jams occur frequently
The following are the common causes of paper jams. If the problem persists, check for the following situations.
y An unsuitable original is placed on the Reversing Automatic Document Feeder.
y Unavailable paper with the equipment is used.
y Paper sizes are not consistent between the size in a drawer or the bypass tray and the one registered in the
equipment.
y All the jammed paper has not been removed.
y There is too little or too much gap between paper and the side guide in the drawer.
y The amount of paper placed in a drawer exceeds the limit indicated on the side guide of the drawer.
Paper jam in the Reversing Automatic Document Feeder (optional)
1
Raise the lever and open the upper cover.
2
Remove the original.
3
Turn the dial to remove the original.
4
Open the transport guide.
1
2

Table of Contents

Other manuals for Toshiba e-STUDIO 2830c

Related product manuals