e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-55
3.14.2 To Adjust the Print Image Quality in the Black and White Mode
* Perform the adjustment in accordance with the procedures below.
* Both the service technician and the user can use procedure (1).
* Only the service technician must use procedures (2) and (3).
(1) Change the "Halftone" option on the printer driver.
For Windows
* This adjustment will have an effect only on Black and white mode printing.
Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab.
Select "Detail" from among the "Halftone" options in the “Basic” tab.
PCL6 PS3 XPS
3. Printer-specific Adjustments
To Next Page
Loading...
