e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-101
(2) Change the "Sharpness" option on the printer driver.
For Windows
Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab.
Set the value for "Sharpness" within a range of "-4" to "4" or to "OFF" in the "Image Attribute" tab.
The value "OFF" of sharpness intensity adjustment is positioned as shown below.
PCL6 PS3 XPS
3. Printer-specific Adjustments
To Next Page
Loading...
