Toshiba e-STUDIO 2830c - Page 51

3
2
1
4
5
Adding Staples
49
1
Open the front cover of the Saddle Stitch Finisher
and take o the staple cartridge.
1
1
2
3
2
Press the buttons on both sides of the cartridge
and take out the empty staple case.
3
Install a new staple case into the staple cartridge.
1
2
4
Press down the transparent cover and pull out the
seal.
5
Install the staple cartridge onto the stapler.
6
Close the front cover of the Saddle Stitch Finisher.
Saddle Stitch Finisher (Optional: MJ-1030)