Toshiba e-STUDIO 2830c - Specifications of Equipment

5
2
1
3
4
65
Specications of Equipment
Specications of Equipment
The specications of the equipment are as follows.
Acceptable paper
Feeder Media type Weight Maximum sheet capacity Paper size
Drawers
(Including optional
drawers)
*1
PLAIN,
RECYCLED
PAPER
6
4 - 105 g/m
2
17 - 28 lb.
Bond
600 sheets (6
4 g/m
2
, 17 lb. Bond)
550 sheets (80 g/m
2
, 20 lb. Bond)
500 sheets (81 - 105 g/m
2
, 24 lb.
Bond, 28 lb. Bond)
A/B format:
A3, A
4, A4-R, A5-R, B4, B5, B5-R, FOLIO
LT format:
LD
, LG, LT, LT-R, ST-R, COMP, 13"LG,
8.5"SQ
K format:
8K
, 16K, 16K-R
THICK1
106 - 163 g/m
2
- 90 lb. Index
300 sheets
THICK2
1
64 - 209 g/m
2
- 110 lb. Index
250 sheets
THICK3
2
10 - 256 g/m
2
- 140 lb. Index
200 sheets
Large Capacity
Feeder (optional)
PLAIN,
RECYCLED
PAPER
6
4 - 105 g/m
2
17 - 28 lb.
Bond
3000 sheets (6
4 g/m
2
, 17 lb. Bond)
2500 sheets (80 g/m
2
, 20 lb. Bond)
2000 sheets (81 - 105 g/m
2
, 21 - 28
lb. Bond)
A
4, LT
Bypass tray
PLAIN,
RECYCLED
PAPER
6
4 - 105 g/m
2
17 - 28 lb.
Bond
1
00 sheets (64 - 80 g/m
2
, 17 - 20
lb. Bond)
80 sheets (8
1 - 105 g/m
2
, 21 - 28
lb. Bond)
A/B format:
A3, A
4, A4-R, A5-R, A6-R
*6
, B4, B5, B5-R,
FOLIO, 305 mm x 457 mm
*8, *9
, 320 mm
x 450 mm
*9, *10, *11
, 320 mm x 460 mm
*9,
*11, *12
LT format:
LD, LG, LT, LT-R, ST-R, COMP, 13"LG,
8.5"SQ, 12" x 18"
*8, *9
K format:
8K, 16K, 16K-R
Non-Standard size:
L
ength: 100 - 297 mm (3.9 - 11.7"),
Width: 148 - 432 mm (5.8 - 17")
THICK1
106 - 163 g/m
2
- 90 lb. Index
40 sheets
THICK2
*2
164 - 209 g/m
2
- 110 lb. Index
30 sheets
THICK3
2
10 - 256 g/m
2
- 140 lb. Index
30 sheets
THICK
4
*3, *4
257 - 280 g/m
2
- 150 lb. Index
30 sheets
*6
SPECIAL1,
SPECIAL2
*5
230 g/m
2
30 sheets
*7
TRANSPARENCY
—
30 sheets
*6
A4, LT
*1 To print on the back side of THICK1 to 3, use the bypass tray.
*2 For printing the sticker labels, select “THICK2” as the media type.
*3 The upper receiving tray of the Finisher (MJ-1101), tray 1 of the Saddle Stitch Finisher (MJ-1030), tray of the Hanging Finisher (MJ-1031) and receiving
tray of the equipment are available for paper exiting.
*4 When duplex copying is performed on THICK4, black streaks may appear on the copied image. They are highly visible on an image with high or uneven
density.
*5 SPECIAL1 and SPECIAL2 represent “Waterproof paper”.
*6 Automatic duplex copying is not available.
*7 For duplex copying, use waterproof paper for duplex copying.
*8 If an optional nisher has been installed, the receiving tray of the equipment is not available for paper exiting. The upper receiving tray of the Finisher
(MJ-1101) and tray 1 of the Saddle Stitch Finisher (MJ-1030) are available for paper exiting.
*9 When paper is exiting, remove one sheet after another from the receiving tray, since it may fall o the tray.
*10 If an optional nisher has been installed, the upper receiving tray of the Finisher (MJ-1101), tray 1 of the Saddle Stitch Finisher (MJ-1030) and the
receiving tray of the equipment are available for paper exiting.
*11 Note that black streaks may appear on the edge of the printed paper.
*12 If an optional nisher has been installed, the receiving tray of the equipment is not available for paper exiting, but the upper receiving tray of the
Finisher (MJ-1101) and tray 1 of the Saddle Stitch Finisher (MJ-1030) are available.