Setting up NetWare Print Server 25
4
Enter the NDPS Manager name or click [Browse] to locate it.
5
Select “TOSHIBA NDPS Gateway Configuration” in the “Gateway
types” list, then click [OK].
y The Gateway Configuration dialog box appears.
6
Select the NDPS Gateway Printing Mechanism and click [Next].
The configuration dialog that appears depends on the printing mechanism you choose. A
description of the configuration settings for each option follows. When you finish
configuring the Printer Agent, proceed to "Select Drivers" on page 25.
P.25 “LPR on IP”
P.25 “Queue-Based (NDS Printer Agent)”
LPR on IP
If you select the LPR Gateway configuration option, the Remote-LPR Printer Configuration dia-
log box opens:
1
Enter the IP Address of the equipment and then click [Finish].
2
To confirm your choice, click [Yes].
When the update is complete, you can proceed to "Select Drivers" on page 25.
Queue-Based (NDS Printer Agent)
If you select the Queue-based (NDS Printer Agent) option, the Configure Printer Agent dialog
box opens:
1
Either type in the Advertising Print Server name, or click [Search] to
automatically locate print server information and choose a device
name from the drop-down list.
Once a server is selected, the remaining fields are populated with the associated data.
2
Check the “Manual Configuration” checkbox to edit the default data
or if the device is not automatically located.
IPX Address — Enter the 8 digit IPX Network Address (NET) of the Novell network in the
first field, and enter the MAC Address of the device in the second field.
Print Server Name — Enter the Novell Network Print Server Name of the device.
Password — Enter the password for the Novell Network Print Server if required.
Printer Name — Enter the “<Novell Network Print Server Name of the device>_PTR”.
NDS Volume for the Print Queue — Enter the
“<Novell Server Name>_<Volume>.<Context>” of the object.
3
Click [Finish].
4
To confirm your choice, click [Yes].
When the update is complete, proceed to "Select Drivers" on page 25.
Select Drivers
After you create a Printer Agent, configure the options. When the update completes, the Select
Printer Drivers dialog box opens:
1
Select the appropriate operating system tab.
To Next Page
Loading...
