5. Using Template
60 Scanning Guide — Scanning Using Template
Scanning Using Template
Users can also use a template to operate scanning on this equipment.
It enables users to register templates for scanning operations.
Once registering a template, users can operate the scanning operation quickly without
setting the scanning conditions.
NOTE: Before scanning using a template, users must register a template for scan operations.
For instructions on how to register a template, see the following section.
P.68 "Registering Scan Template"
SUPPLEMENT: The templates that the Scan to E-mail agent is set will be available after user authenti-
cates the access rights for the Scan to E-mail operation. For instructions on how to
operate scan using a template, see the following section.
P.63 "Using Scan to E-mail template when SMTP Authentication is enabled"
Scan Procedure using a template
1. Place the original(s).
• For instruction about placing the originals, see Operator’s Manual for
Basic Function.
2. Press the [TEMAPLATE] button on the control panel to enter
the template menu.
• The screen to select a template group is displayed.
To Next Page
Loading...
