Toshiba e-STUDIO 352 - Configuring UNIX Printing Using UNIX Filters

Setting Up the UNIX Filters 179
Module: Python must be installed.
The “Python” module must be installed on your UNIX workstation to enable printing. The
“Python” module is usually installed in the “/usr/bin/” directory. Check this directory whether the
“Python” module is installed.
Configuring UNIX Printing Using UNIX Filters
When you want to configure the UNIX printing using the UNIX filters, install the UNIX filters and
configure the LPR queue.
Installing the UNIX Filters
UNIX Filters are provided as TAR files for each Operating System. You can install them by
copying the TAR file into the root directory and extract the file.
Copying the UNIX filters
1
Insert the Client Utilities CD-ROM into the CD-ROM drive.
2
Log on to the root account.
3
Enter the following command and check the output:
y For Solaris:
uname -a
Output on screen should be:
SunOS
y For HP-UX:
uname -a
Output on screen should be:
HP-UX
y For IBM AIX:
uname -a
Output on screen should be:
AIX
y For Linux:
uname -a
Output on screen should be:
Linux
y For OpenUNIX:
uname -a
Output on screen should be:
OpenUNIX
If the output is not as above, ask your administrator.