Toshiba e-STUDIO 352 - Deleting a Print Queue Manually

Setting Up the UNIX Filters 185
— Deleting a Print Queue Using estbwrm
When you want to delete the queue using estbwrm, perform the following procedure.
Deleting a print queue
1
Log on to the root account.
2
Enter the following command:
estbwrm <queue name>
y This command uses the system’s lpadmin command to delete the print queue and
configuration file.
y Please restart the lpd under Linux.
— Deleting a Print Queue Manually
You can also configure the print queue by adding a print queue manually.
The procedure varies depending on the operating systems.
 P.185 “Deleting a print queue manually on Solaris”
 P.185 “Deleting a print queue manually on HP-UX”
 P.186 “Deleting a print queue manually on IBM AIX”
 P.186 “Deleting a print queue manually on Linux”
 P.186 “Deleting a print queue manually on OpenUNIX”
Deleting a print queue manually on Solaris
1
Log on to the root account.
2
Enter the following command:
lpadmin -x <queue name>
3
Enter the following command:
rm /etc/lp/interfaces/<queue name>.conf
Deleting a print queue manually on HP-UX
1
Log on to the root account.
2
Enter the following command:
ps -ef | grep lpsched | grep -iv grep > /dev/null 2>&1
3
Enter the following command:
Echo $?
4
If “0” outputted on the screen, turn the scheduler OFF. Enter the
following command:
/usr/sbin/lpshut > /dev/null 2>&1
5
Enter the following command:
/usr/sbin/lpadmin -x <queue name>