Toshiba e-STUDIO 352 - Device Status Indicators

To Next Page

To Previous Page

10 Troubleshooting

382 TopAccessDocMon Errors

Device Status Indicators

The Printer Image area for the TopAccessDocMon Device tab window displays visual Device

Status Indicators in the event of a device malfunction.

y Printer Error 1

The above printer error icon indicate that non-recommended toner is being used. For infor-

mation on resolving the error condition, refer to “REPLACE TONER CARTRIDGE SYMBOL”

in Operator’s Manual for Basic Function.

y Printer Error 2

The above printer error icon indicates:

- You need to remove paper from standard output tray.

- You need to remove paper from Job Separator.(Only for e-STUDIO3510c Series,

e-STUDIO451c Series, e-STUDIO452 Series, e-STUDIO282 Series, e-STUDIO4511

Series, e-STUDIO450 Series, and e-STUDIO230 Series)

- You need to remove paper from Finisher tray.

- You need to remove staples jammed in the Finisher. For information on resolving the

error condition, refer to “CLEAR PAPER SYMBOL” in Operator’s Manual for Basic

Function.

- You need to clear hole punches from Finisher. For information on resolving the error con-

dition, refer to “DISPOSING OF THE PUNCHED PAPER BITS (OPTIONAL)” in Opera-

tor’s Manual for Basic Function.

Contact Ser-

vice Techni-

cian

Automatic Document Feeder Error - Please Con-

tact Service Technician.