115
3
1-sided original -> 2-sided copy
When you copy 1-sided portrait originals to 2-sided copies placing them in a landscape direction, you can
make a booklet-type copy in the direction of “open toward the left” opening, using the image direction
mode in the edit menu. ( P.167 “14.IMAGE DIRECTION”)
1
Place paper in the drawer(s).
• When using this mode in bypass copying, specify the paper size in advance. ( P.75 “3.Bypass Copying”)
2
Place the original(s).
3
Press the simplex/duplex button on the basic menu.
4
Press the [1 -> 2 DUPLEX] button.
• Set other copy modes as required.
5
Press the [START] button.
• When placing an original on the original glass, follow steps 5 to 6 of P.69 “Placing an original on the original
glass” continuously.
To Next Page
Loading...
