342
12.SPECIFICATIONS & OPTIONS
12
1. Specifications
Model Name DP-3540/4540
Type Desktop type
Original Glass Fixed
Printing (Copying) System Indirect electrophotographic method
Developing System 2-component magnetic brush developing
Fixing Method Induction heating
Photosensor Type OPC
Original Scanning System Flat surface scanning system
(When the reversing automatic document feeder is installed: Fixed
scanning system by feeding the original)
Original Scanning Sensor Linear CCD sensor
Scanning Light Source Xenon lamp
Resolution Scanning 600 dpi x 600 dpi
Writing 2,400 dpi x 600 dpi (Smoothing process)
Acceptable Originals Sheets, books and 3-dimensional objects
Acceptable Original Size Max. LD
Acceptable Copy
Paper Size
Drawer A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R,
COMP, 13” LG, 8.5” SQ, 8K, 16K, 16K-R
Bypass Paper size within 100-297 mm (Length), 148-432 mm (Width)
Acceptable Copy
Paper Weight
Drawer
64-105 g/m
2
Bypass
64-209 g/m
2
(for continuous feed)
50-209 g/m
2
(for single feed)
Warm-up Time Approx. 20 seconds *
First Copy Time Approx. 3.9 seconds *
Continuous Copy Speed See “Continuous Copying Speed”.
Multiple Copying Up to 999 copies (digital key entry)
Excluded Image
Width
Copy Leading edge: 3.0±2.0 mm, Trailing edge: 2.0±2.0 mm,
Both edge: 2.0±2.0 mm
Printer Leading edge: 5.0±2.0 mm, Trailing edge: 5.0±2.0 mm,
Both edge: 5.0±2.0 mm
Reproduction Ratio Actual size: 100±0.5%
Zoom: 25-400% (in 1% increments)
For the reversing document feeder 25-200% (in 1% increments)
Paper Supply Drawer
Approx. 550 sheets (80 g/m
2
)
Bypass
Approx. 100 sheets (80 g/m
2
)
Toner Density Adjustment Magnetic auto-toner system
Exposure Control Automatic plus manual selection from 11 exposure step
Environment (for normal use) Temperature: 10 º - 30 ºC, Humidity: 20 - 80% (No Condensation)
Power Requirements AC 220-240 V±10%, 8 A (50/60 Hz)
Power Consumption 1.6 kW or less (including optional equipments)
Dimensions (equipment only) 660 mm (W) x 758 mm (D) x 739 mm (H)
To Next Page
Loading...
