215
7
3
Select the user group you want to change, and then press the [EDIT]
button.
• If the desired user group is not displayed on the menu, press the [Prev] or [Next] button to switch the menu.
• To display the applicable menu immediately, key in the user group number.
4
Key in the password (5 digits) for the selected user group, and then
press the [ENTER] button.
• If no password was set when the user group was registered, skip to step 5.
5
Press the [NAME] button, and then enter the new name of the user
group.
• When the [NAME] button is pressed, the letter entry menu ( P.35) is displayed. Up to 20 characters can be
entered.
To Next Page
Loading...
