284
9.BLINKING GRAPHIC SYMBOLS
5.Jam Symbols (Cont.)
9
3
Close the cover.
Releasing a paper misfeed on the bypass tray
Releasing a paper misfeed in the automatic duplexer
• Be careful not to let your fingers be caught between the equipment and the automatic duplexer. This
could injure you.
• Do not touch the metal portion of a guide plate as it could burn you.
To release a paper misfeed in the Paper Feed Pedestal
(optional):
Open the cover of the Paper Feed Pedestal as shown on
the right, and remove any misfed paper.
1
Pull out misfed paper on the bypass tray.
1
Make sure that the bypass tray is
opened, and then open the automatic
duplexer.
To Next Page
Loading...
