286
9.BLINKING GRAPHIC SYMBOLS
5.Jam Symbols (Cont.)
9
Releasing a paper misfeed in the fuser unit
Do not touch the fuser unit or the metal area around it. Since they are very hot, you could be burned or the
shock could cause an injury to your hand.
1
Make sure that the bypass tray, the auto-
matic duplexer and the jam releasing
cover are open, and push down the 2
fuser pressure release levers until they
come to a stop.
Be sure to perform step 1 without fail.
2
Open the fuser unit cover.
3
Holding the knob (A), open the transport
guide.
(
A
)
(
A
)
To Next Page
Loading...
