288
9.BLINKING GRAPHIC SYMBOLS
5.Jam Symbols (Cont.)
9
5
Close the offset tray cover or job separator cover. Close the fuser unit
cover and the jam releasing unit cover. Return the automatic duplexer
and bypass tray to the original positions.
Releasing a paper misfeed in the Bridge Unit (optional)
3
Open the offset tray cover or job separa-
tor cover.
4
Remove any misfed paper inside the off-
set tray unit or job separator unit.
1
Holding the cover handle of the Bridge
Unit, open the cover.
To Next Page
Loading...
