46
1.BEFORE USING EQUIPMENT
3.Energy Saving Mode (Cont.)
1
2
Press the [SLEEP] button on the touch panel.
• The equipment enters into the sleep mode. During this mode, the display on the touch panel disappears and
the [ENERGY SAVER] button lights in green.
To cancelling the energy saving mode
Press the [ENERGY SAVER] button on the control panel. The sleep mode is cleared and the equipment
will be ready for copying.
The sleep mode is also cleared by pressing any button of [COPY], [SCAN], [FAX], [e-FILING] and
[START].
The [SCAN] is enabled only when the Printer/Scanner Kit or the Scanner Kit (both optional) is installed.
The [FAX] button is enabled only when any of the FAX Unit, Printer/Scanner Kit and Scanner Kit (all
optional) is installed.
To Next Page
Loading...
