e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 29
6. Printer-specific Adjustments (GA-1211)
(10) Adjust the curve for each color with Color Editor, and then click [Test Print]. Then check [Sample Image
Page] on the Test Print dialog box. (You can leave [Comparison Page] unchecked if not necessary.) Then click
[Print] to print the CALIB.PS file in the hold queue. Repeat this operation until the colors with which the user
is satisfied are printed out.
(11) When satisfactory colors are printed, click [Save] of Color Editor to save the adjustment result.
To Next Page
Loading...
