1.TROUBLESHOOTING FOR THE HARDWARE
When This Screen Is Displayed 13
TROUBLESHOOTING FOR THE HARDWARE
The options with the mark indicated
in the figure are not usable.
To release the detaching condition
of the options, adjustment by a
service technician is required.
Two or more sheets of original are
fed together. Remove the misfed
originals and check their condition.
Then replace them on the ADF.
For details, see the reference below:
P.16 “ADF”
For details on how to set paper, see
the reference below:
Preparation of Paper - PLACING
ORIGINALS - Placing Originals -
Using the ADF
Screen Description / Remedy
To Next Page
Loading...
