Toshiba E-STUDIO 4528A - Drawers (Except for E-STUDIO2020 AC;2520 AC)

1.TROUBLESHOOTING FOR THE HARDWARE
28 Clearing a Paper Misfeed
 The second to fourth drawers
1
Open the paper source drawer, and remove the misfed paper.
2
Check that the guide width is correct, there is no folded/curled paper or overloading, and then
close the drawer.
 Drawers (Except for e-STUDIO2020AC/2520AC)
1
Open the paper source drawer, and remove the misfed paper.
2
Check that the guide width is correct, there is no folded/curled paper or overloading, and then
close the drawer.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides.