Toshiba E-STUDIO 4528A - Page 35

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 35
TROUBLESHOOTING FOR THE HARDWARE
5
When the finisher is installed, open the Bridge Kit cover while holding the handle.
6
Remove the misfed paper.
7
When the finisher is installed, close the Bridge Kit cover.
8
For e-STUDIO2020AC/2520AC and e-STUDIO2525AC/3025AC/3525AC/4525AC, return the two
green fuser pressure release levers to their original position.
9
Close the automatic duplexing unit cover.
1
2
2