1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Staple Jam 63
TROUBLESHOOTING FOR THE HARDWARE
4
Remove the top staple sheet.
5
Holding the knob, raise the guide, and return it to its original position.
6
Remove the staples if they have fallen between the staple cartridge and the staple case or in the
staple receiver.
7
Fit the staple cartridge into the stapler.
When fitting the staple cartridge, hold the green-labeled portion of the bracket securely so that the bracket will
not move.
Insert the cartridge until it is caught by the latch and fixed with a click.
8
Close the front cover of the finisher.
To Next Page
Loading...
