Toshiba E-STUDIO 4528A - Page 77

1.TROUBLESHOOTING FOR THE HARDWARE
Replacing the Waste Toner Box 77
TROUBLESHOOTING FOR THE HARDWARE
3
Place the waste toner box on a large sheet so as not to dirty the floor.
Do not place the waste toner box with its toner collecting holes face down.
The waste toner may spill out from the box’s toner collecting holes.
4
Take the new waste toner box out of the carton.
5
Put the used waste toner box in the plastic bag and seal it with adhesive tape.
6
Clean the LED print head (for e-STUDIO2020AC/2520AC) or the slit glass (except for
e-STUDIO2020AC/2520AC).
e-STUDIO2020AC/2520AC: Perform steps 5 to 11 on  P.85 “The Main Chargers and LED Print Heads
(e-STUDIO2020AC/2520AC)”.
Except for e-STUDIO2020AC/2520AC: Perform steps 5 to 9 on  P.89 “The Main Chargers and Slit Glass (e-
STUDIO2525AC/3025AC/3525AC/4525AC/5525AC/6525AC and e-STUDIO5528A/6528A)”.
7
Push the new waste toner box securely until the upper latches click.
3
2
1