Toshiba e-studio 4555ce - Clearing a Staple Jam; Staple Jam in the Finisher

1 TROUBLESHOOTING FOR THE HARDWARE
46 Clearing a Staple Jam
Clearing a Staple Jam
When a staple jam has occurred in the stapler of the finisher or saddle stitch unit, clear the jam following the
procedure below.
 P.46 “Staple jam in the finisher”
 P.50 “Staple jam in the Saddle Stitch unit”
 Staple jam in the finisher
 Finisher / Saddle Stitch Finisher
1
Open the front cover of the finisher.
2
Remove the staple cartridge.
3
Lower the guide while holding the knob.
Do not touch the stapling area.
The actual needle point could cause you personal injury.
4
Remove the top staple sheet.