6 TEMPLATES
142 Recalling Templates
6
Press the button for the desired template.
To switch the menu
Press or .
Templates with the automatic start function enabled can be identified with . If this mark is displayed,
you can press it to immediately start the operation of the functions set in the template.
7
Key in the password for the selected template. (If no password is set, go to step 8.)
1) Press [PASSWORD] and then enter the password with the buttons on the touch panel or the digital
keys on the control panel.
2) Press [OK].
8
Confirm that “Updated the template setting.” is displayed on the touch panel.
The message is displayed for approx. 3 seconds.
9
Select other copy modes as required, and then press the [START] button on the control
panel.
To Next Page
Loading...
