Setting up from TopAccess 137
3) Context
Enter the NDS context that the NetWare print server for this equipment is located.
4) Tree
Enter the NDS tree.
5) Search root
Enter the NetWare server name that this equipment preferentially searches for the queues.
Setting up the HTTP Network Service
In HTTP Network Service, you can enable or disable Web-based services such as TopAccess
and e-Filing web utility.
1) Enable HTTP Server
Select whether the Web-based services such as TopAccess and e-Filing web utility are
enabled or disabled.
2) Enable SSL
Select whether the SSL (Secure Sockets Layer) is enabled or disabled.
When this is enabled, the data transferred between the equipment and client computers will
be encrypted using a private key when operating TopAccess and e-Filing web utility.
yTo enable SSL, you must create a self-signed certificate or import a server certificate in
Security Service. If the self-signed certificate is not created or a server certificate is not
imported, the SSL will not work correctly.
P.145 “Setting up the Security Service”
yNot all operating systems support SSL for all protocols.
3) Primary Port Number
Enter the port number for the NIC HTTP server. Generally “80” is used for this port.
4) Secondary Port Number
Enter the port number for TopAccess and the e-Filing web utility. Generally “8080” is used
for this port.
5) SSL Port Number
Enter the port number for the SSL. Generally “10443” is used for this port.
Setting up the SMTP Client
In SMTP Client, you can enable or disable SMTP transmission for sending the Internet Fax and
Emails.
1
2
3
4
5
To Next Page
Loading...
