Toshiba e-STUDIO 520 - Setting up the Fax Settings

7 TopAccess Administrator Mode
164 Setting up from TopAccess
Setting up the Fax Settings
In Fax Settings, you can set the default fax settings that apply to fax operation from the Touch
Panel Display.
1) Terminal ID
Enter the terminal ID name (company name) to identify this equipment. The name will be
printed at the leading edge of all documents transmitted.
2) Fax Number
Enter the fax number of this equipment. This fax number will be printed at the leading edge
of all documents transmitted from Line 1.
3) Line 2 Number
Enter the fax number for Line 2 of this equipment — if installed. This fax number will be
printed at the leading edge of all documents transmitted from Line 2.
4) Monitor Volume
Select the volume of the line monitor during transmission.
5) Completion Volume
Select the volume of the line monitor when completing the print for received fax.
6) Reception Mode
Select how this equipment activates when a fax is received.
20
12
11
10
1
2
3
4
5
6
7
8
9
13
14
15
16
17
18
19
21
22
23
24
25