7 TopAccess Administrator Mode
160 Setting up from TopAccess
5
Click [OK] to apply the changes.
When using the Internet Explorer, the settings that are displayed in each field may not be
changed even if you change the settings and click [Save]. However, the settings have
been changed in the equipment. In that case, click the Copier submenu then the page
displays the current settings in each field.
Setting up the Copier Settings
In Copier Settings, you can set the default copier settings that apply for copy operation from the
Touch Panel Display.
1) Original Mode
Select the default original mode for black/white originals.
2) Exposure
Select the type of image density for black and white copy.
- Auto
— Select this to set the Auto mode as the default exposure for black and white
copy. The Auto mode automatically detects the density of the original to make copies at
the optimum exposure.
- Manual — Select this to set the Manual mode as the default exposure for black and
white copy. The manual mode manually specifies the density of the original.
3) Bypass Tray
Select the default paper type for the Bypass Tray.
4) BOOK > 2
Select the default page arrangement of the book-type originals for Book to 2-sided copy.
- Open from left
— Select this to copy the booklet originals that are read from a left page.
- Open from right — Select this to copy the booklet originals that are read from a right
page.
5) Magazine Sort
Select the default page arrangement for magazine sort copy.
- Open from left
— Select this to set to create a booklet that can be read from a left page.
- Open from right — Select this to set to create a booklet that can be read from a right
page.
6) 2in1/4in1
Select the default page arrangement for 2in1/4in1 copy.
1
2
3
4
5
6
7
8
9
To Next Page
Loading...
