7 TopAccess Administrator Mode
188 Setting up from TopAccess
3) Banners
Select whether printing a banner page for each print job using LPR printing.
Setting up the IPP Print
In IPP Print, you can set the IPP Print options to enable the IPP print service.
1) Enable IPP
Enable or disable IPP print service.
2) Port80 Enable
Enable or disable the Port80 for IPP printing. Port631 is usually used for the IPP access so
users must specify to the URL, i.e. “http://<IP address or DNS name>:631/Print”, for the IPP
port. When this is enabled, this equipment allows IPP access through the Port80, which is
the default port for the HTTP access so users do not have to specify the port number in the
IPP port, i.e. “http://<IP address or DNS name>/Print”.
3) Port Number
If enabling the IPP, enter the IPP port number. Generally “631” is used.
4) URL
Display the URL for IPP printing. You cannot change the URL for IPP printing. This URL
should be set as the print port when users set up the printer driver for IPP printing.
5) Enable SSL
Enable or disable the SSL for IPP printing.
yTo enable SSL, you must create a self-signed certificate or import a server certificate in
Security Service. If the self-signed certificate is not created or a server certificate is not
imported, the SSL will not work correctly.
P.145 “Setting up the Security Service”
yWhen the SLL is enabled, users can print to the IPP print port using the SSL. To print the
IPP print port using the SSL, specify the following URL for the IPP print port.
https://<IP Address>:<SSL Port Number>/Print
yNot all operating systems support SSL for all protocols.
6) SSL Port Number
Enter the port number for SSL. Generally “443” is used.
11
10
1
2
3
4
5
6
7
8
9
12
To Next Page
Loading...
