Setting up User Management 269
4
Select “LDAP Authentication”.
y The confirmation dialog box appears.
You can disable the User Management Setting by selecting “Disable” and click [Next].
5
Click [OK].
6
Select how to process a print job whose user authentication has
failed in the User Authentication Enforcement drop down box, and
then click [Next].
y In the “User Authentication Enforcement” drop down box, select whether invalid jobs,
which an authentication failed, are printed or stored in the invalid job list.
- ON — Select this to not print the invalid jobs and store them in the invalid job list.
- Print — Select this to print the invalid jobs.
- Delete — Select this to delete the invalid jobs without storing them in the invalid
job list.
yIf you want to automatically register user information entered in the authentication
screen on the touch panel, TopAccess, or e-Filing Web Utility into this equipment,
enable the department management and then check the “Create User Information
Automatically” checkbox.
yIf you want to enable the gest user operations, check the “Enable Guest User” check
box.
To Next Page
Loading...
