7 TopAccess Administrator Mode
274 Setting up User Management
4
Select “MFP Local Authentication” in the “User Authentication”
drop down box, and select how invalid jobs are processed in the
“User Authentication Enforcement” drop down box. Then click
[Next].
y The MFP Local Authentication is enabled.
y In the “User Authentication Enforcement” drop down box, select whether invalid jobs,
which an authentication failed, are printed or stored in the invalid job list.
- ON — Select this to not print the invalid jobs and store them in the invalid job list.
- Print — Select this to print the invalid jobs.
- Delete — Select this to delete the invalid jobs without storing them in the invalid
job list.
yIf you want to automatically register user information entered in the authentication
screen on the touch panel, TopAccess, or e-Filing Web Utility into this equipment,
enable the department management and then check the “Create User Information
Automatically” checkbox.
yYou can disable the User Management Setting by selecting “Disable” and click [Next].
yIf you want to gest user operations, check the “Enable Guest User” check box. Go to
the next step.
To Next Page
Loading...
