Toshiba E-Studio 657 - Setting duplex copy; Selecting 2-SIDED Mode; Setting original mode; Selecting ORIGINAL MODE

1 TROUBLESHOOTING FOR THE HARDWARE
22 Clearing a Paper Misfeed
4
Close the Hole Punch Unit cover.
5
Remove the misfed paper from the entrance of the
finisher.
6
When the Inserter is installed, pull out the lever to
open its inserter cover.
7
Remove the misfed paper and close the inserter
cover.
8
Open the transport guide of the Inserter.
9
Remove the misfed paper and close the transport
guide.
2
1
2
1
2
1