Toshiba E-Studio 657 - Density adjustment; Manual Density Control; Bypass copying; Bypass Tray Usage

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 23
1 TROUBLESHOOTING FOR THE HARDWARE
10
Raise the paper feeding tray of the Inserter, and then
remove the misfed paper.
11
Open the upper cover of the finisher.
12
Raise the lever "1" and remove the misfed paper.
13
Raise the lever "2" and remove the misfed paper.
14
Hold the green lever in the rear side of the finisher to
open the guide.
2
1
2
1
2
1
2
2
1