4.Using the IP Fax Function
46 Using the IP Fax Function from the Touch Panel
Checking communication status / Checking reserved transmissions
You can check reserved IP Fax transmissions.
1
Press [Job Status].
2
Press [Fax].
Reserved transmission jobs are listed up to 100 transmissions in the chronological order from top to bottom.
To print the list of the reserved transmissions jobs, press [Reservation List].
In the “Status” column, the status of each job is indicated as follows:
- IP: Sending IP Fax.
- Delayed: Reserved with the time to send specified.
- Wait: Communication is in the standby queue.
- Invalid: Under standby due to an invalid department code (Network IP Fax). Check the department code.
Delete any unnecessary reserved transmissions in the standby queue. For details about each operation,
refer to the Fax Guide.
To Next Page
Loading...
Need help?
General
