Setup 153
2
Save within TOSHIBA Viewer.
Right-click on the new settings file and select [Save].
When you click the [Write Setting] button or [Cancel] button to close the screen,
TOSHIBA Viewer will prompt you to save the file.
3
Save as a file on your hard disk.
(1) Right-click on the new settings file and select [Save as....].
(2) The Save settings screen appears. Designate the location on your hard disk and
enter an appropriate file name, then click on [Save].
The settings file is saved as a set file on your hard disk. The file extension is “.set”.
This file can be retrieved by TOSHIBA Viewer.
To Next Page
Loading...
