Toshiba e-STUDIO200L - Page 129

© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 93
2
292 Network Raw printing job
(Paper type)
PRT 0
<0-4>
SYS 0: Plain paper
1: Thick paper 1
2: Thick paper 2
3: Thick paper 3
4: OHP film
1
293 Network Raw printing job
(Paper direction)
PRT 0
<0-1>
SYS 0: Portrait
1: Landscape
1
294 Network Raw printing job (Staple) PRT 1
<0-1>
SYS 0: Valid
1: Invalid
1
295 Network Raw printing job
(receiving tray)
PRT 0
<0-5>
SYS 0: Inner tray
1: Finisher tray 1
2: Finisher tray 2
3: Not used
4: Job Separator
upper tray
5: Job Separator lower
tray
* The settings 4 and 5
are effective only
when the Job Sepa-
rator (MJ-5004) is
installed.
1
296 Network Raw printing job
(Number of form lines)
PRT 1200
<500-
12800>
SYS Sets the number of
form lines from 5 to
128. (A hundredfold of
the number of form
lines is defined as the
setting value.)
1
297 Network Raw printing job
(PCL font pitch)
PRT 1000
<44-
9999>
SYS Sets the font pitch from
0.44 to 99.99. (A hun-
dredfold of the font
pitch is defined as the
setting value.)
1
298 Network Raw printing job
(PCL font size)
PRT 1200
<400-
99975>
SYS Sets the font size from
4 to 999.75. (A hun-
dredfold of the font size
is defined as the setting
value.)
1
299 Network Raw printing job
(PCL font number)
PRT 0
<0-79>
SYS Sets the PCL font num-
ber.
1
300 User
interface
Maximum number of copy
volume (MAX9)
PPC 0
<0-2>
SYS 0: 999 1: 99
2: 9
1
302 User
interface
Original counter display ALL EUR: 2
UC: 0
JPN: 0
<0,2>
SYS Sets whether the origi-
nal counter is dis-
played or not.
0: Not displayed
2: Displayed
1
Setting mode (08) <e-STUDIO200L/230/230L/280>
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure