© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
FIRMWARE UPDATING
6 - 95
6
(7) Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
When the FROM basic section software version of the equipment is "V1.00 / 1.12" or earlier:
Fig. 6-102
When the FROM basic section software version of the equipment is "V1.00 / 4.22" or later:
Fig. 6-103
Status display during update Status display when update is completed
OS Update ....... OS Update .......Completed
HD Data Update ....... HD Data Update .......Completed
UI Data Update ....... UI Data Update .......Completed
SysFirm Update ....... SysFirm Update .......Completed
Engine MAIN Update ..Flash Update Engine MAIN Update ..Completed
Scanner Firm Update..Flash Update Scanner Firm Update..Completed
Status display during update Status display when update is completed
OS UI Update ....... OS UI Update .......Completed
HDD SYS Update ....... HDD SYS Update .......Completed
Engine MAIN Update .......Flash Update Engine MAIN Update .......Completed
Scanner Firm Update .......Flash Update Scanner Firm Update .......Completed
06/10
To Next Page
Loading...
