Toshiba e-STUDIO200L - OS UI Update

© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
FIRMWARE UPDATING
6 - 45
6
[D] Display during the update (When the FROM basic section software version to be updated is
"V1.00 / 4.22" or later)
Update is performed in parallel as shown in the transition diagram below.
Below is an example of the changes of the LCD screen during update.
Select items to be updated and press the
[START] button.
Item Selection Screen for Update
1. OS UI Update
[
System ROM
]
Update Completed
[
Engine ROM
]
3. Scanner Firmware Update
[
Scanner ROM
]
2. Engine Firmware Update
Turn ON the power while [8] button and [9] button are pressed simultaneously
06/10