Toshiba e-STUDIO200L - Page 674

e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283 © 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
6 - 94
(6) Select the item with the digital keys.
“*” is displayed next to the selected item. Display or delete the “*” by pressing the number of the
item. All items are selected in the default settings.
• Select all items to update the firmware of the equipment in a batch.
• Select items as follows to update individually.
Example: Updating the master data and system ROM
When the FROM basic section software version of the equipment is "V1.00 / 1.12" or earlier:
Fig. 6-100
When the FROM basic section software version of the equipment is "V1.00 / 4.22" or later:
Fig. 6-101
(Updating all the items is taken as an example and explained in the following procedures.)
Types of Firmware
Items
<Items vary depending on the FROM basic section software version
of the equipment>
“V1.00/1.12” or earlier “V1.00/4.22” or later
System ROM
(OS data)
0. OS Update 1. OS UI Update
System ROM
(UI data)
2. UI Data Update
Master data 1. HDD Update 2. HDD SYS Update
System ROM
(System firmware)
3. System Firmware Update
Engine ROM 4. Engine Firmware Update 3. Engine Firmware Update
Scanner ROM 5. Scanner Firmware Update 4. Scanner Firmware Update
06/10