© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ADJUSTMENT
3 - 101
3
(4) Connect the connector of the counter socket
to the harness connector of the equipment
side.
(5) Install the counter socket to the machine
frame with two screws.
(6) Reattach the cover.
Fig. 3-136
(7) Insert the key copy counter with its arrow
mark pointing the rear side of the equipment.
Fig. 3-137
(8) Enter the value “3” in the setting mode (08-
202).
To Next Page
Loading...
