Toshiba e-STUDIO200L - Page 576

e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283 © 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
TROUBLESHOOTING
5 - 122
(11) Turn the power OFF.
* If the FAX board has not been installed, skip to step (13).
(12) Start up with the FAX Clearing Mode (1*)
(13) Perform 1*-102 (Clearing the image data).
Note: Note:
Following image data are deleted when 1*-102 is performed.
- Images of fax polling transmission
- Images of fax Mailbox and box information
- Images of fax transmission
- Images of fax reception
(14) Turn the power OFF.
(15) Turn the power ON.
(16) Set the dial type. [USER FUNCTIONS] → [ADMIN] → [FAX] → [INITIAL SETUP]
07/05