© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
FIRMWARE UPDATING
6 - 39
6
When the FROM basic section software version to be updated is "V1.00 / 1.12" or earlier:
Fig. 6-46
When the FROM basic section software version to be updated is "V1.00 / 4.22" or later:
Fig. 6-47
(9) Turn OFF the power, remove the download jig and install the cover plate and the connector
cover.
(10) Perform the initialization of the updating data.
• Turn ON the power while [0] button and [8] button are pressed simultaneously.
• Key in “947”, and then press the [START] button.
• Press the [INITIALIZE] button.
06/10
To Next Page
Loading...
