© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1 - 1
1
1. SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1.1 Specifications
Copy process Indirect electrophotographic process (dry)
Type Desktop type (console type: when paper feed pedestal (PFP) and large
capacity feeder (LCF) are installed)
Original table Fixed type (the left rear corner used as guide to place originals)
Accepted originals Sheet, book and 3-dimensional object. The reversing automatic document
feeder (RADF) only accepts paper which are not pasted or stapled. Carbon
paper are not acceptable either.
Maximum size: A3/LD
Copy speed (Copies/min.)
e-STUDIO200L/202L/203L
e-STUDIO230/230L/232/232S/233
e-STUDIO280/280S/282/282S/283/283S
* “–” means “Not acceptable”.
* The copy speed in the above table are available when originals are manually placed for single side,
multiple copying.
Values in { } are for e-STUDIO200L/202L/203L and values in [ ] are for e- STUDIO280/280S/282/
282S/283/283S in case that the specification is different among e-STUDIO200L/202L/203L,
e-STUDIO230/230L/232/232S/233 and e-STUDIO280/280S/282/282S/283/283S.
Single - sided original Double - sided original
MR-3016
50 ~ 127 g/m
2
(13 lb. Bond - 34 lb. Bond) 50 ~ 105 g/m
2
(13 lb. Bond - 28 lb. Bond)
MR-3018
35 ~ 157 g/m
2
(9.3 lb. Bond - 58 lb. Cover) 50 ~ 157 g/m
2
(13 lb. Bond - 58 lb. Cover)
Paper size Drawer
Bypass feed
PFP LCF
Size specified Size not specified
A4, LT, B5, A5-R, ST-R 20 20 16 20 20
A4-R, B5-R, LT-R 19 19 16 19 –
B4, LG 18 18 16 18 –
A3, LD 16 16 16 16 –
Paper size Drawer
Bypass feed
PFP LCF
Size specified Size not specified
A4, LT, B5, A5-R, ST-R 23 23 16 23 23
A4-R, B5-R, LT-R 21.5 21.5 16 21.5 –
B4, LG 18 18 16 18 –
A3, LD 16 16 16 16 –
Paper size Drawer
Bypass feed
PFP LCF
Size specified Size not specified
A4, LT, B5, A5-R, ST-R 28 28 16 28 28
A4-R, B5-R, LT-R 21.5 21.5 16 21.5 –
B4, LG 18 18 16 18 –
A3, LD 16 16 16 16 –
07/11
To Next Page
Loading...
