e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283 © 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 92
3.12.6 Adjustment of the upper tray angle
<Procedure>
(1) Remove the front cover.
Fig. 3-124
(2) Loosen the screw denoted with the arrow.
Fig. 3-125
(3) The tension becomes loose.
While pushing the bracket down, hold the
tray and move it up or down, to adjust the
angle so that the tray becomes parallel by a
visual check.
Fig. 3-126
Bracket
To Next Page
Loading...
