Toshiba e-STUDIO230 - Page 188

e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283 © 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 152
(4) Press the [ENTER] button to complete overwriting of the counter value.
Note: Note:
The screen returns to the code entry screen without copying (overwriting) the value when the
[CANCEL] button is pressed.
• Key in “2” to copy the value of the backup
counter (SYS board) (B) onto the value of
the total counter (LGC board) (A).
Fig. 2-6
(A) (B)
05/12