© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 261
2
Pickup roller
(PFP upper drawer)
1328-0,1,2,8 1329 <Default values of code 1328
(e-STUDIO202L/203L/232/233/282/
283)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Pickup roller
(PFP lower drawer)
1330-0,1,2,8 1331 <Default values of code 1330
(e-STUDIO202L/203L/232/233/282/
283)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Pickup roller
(Bypass unit)
1332-0,1,2,8 1333 <Default values of code 1332
(e-STUDIO202L/203L/232/233/282/
283)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Recovery blade 1336-0 to 8 1337 <Default values of code 1336
(e-STUDIO202L/203L/232/233/282/
283)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0/0
Sub-code 1: 64,000/74,000/90,000
Sub-code 4: 120,000/120,000/120,000
Items
PM management set-
ting <Procedure 4>
*Indicated in 8 digits
Date of previous
replacement
<Procedure 2>
Remarks
06/09
To Next Page
Loading...
