e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283 © 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 2
E160 Paper misfeeding PFP lower drawer misfeeding (Paper not reaching
the PFP lower drawer feed sensor): The paper fed
from the PFP lower drawer does not reach the PFP
lower drawer feed sensor.
P. 5 - 2 0
E190 LCF misfeeding (Paper not reaching the LCF feed
sensor): The paper fed from the LCF does not
reach the LCF feed sensor.
P. 5 - 2 1
E200 Paper transport jam Upper drawer transport jam (Paper not reaching the
registration sensor): The paper does not reach the
registration sensor after it has passed the 1st trans-
port sensor.
P. 5 - 3
E210 Lower drawer transport jam (Paper not reaching the
registration sensor): The paper does not reach the
registration sensor after it has passed the 1st trans-
port sensor.
P. 5 - 3
E220 Lower drawer transport jam (Paper not reaching the
1st transport sensor): The paper does not reach the
1st transport sensor after it has passed the lower
drawer feed sensor.
P. 5 - 4
E270 Bypass transport jam (paper not reaching the regis-
tration sensor): The paper does not reach the regis-
tration sensor after it has passed the 1st transport
sensor.
P. 5 - 5
E280 ADU transport jam (paper not reaching the registra-
tion sensor): The paper which has passed through
ADU and the 1st transport sensor does not reach
the registration sensor during duplex printing.
P. 5 - 5
E300 PFP upper drawer transport jam (Paper not reach-
ing the registration sensor): The paper does not
reach the registration sensor after it has passed the
1st transport sensor.
P. 5 - 3
E310 PFP upper drawer transport jam (Paper not reach-
ing the 1st transport sensor): The paper does not
reach the 1st transport sensor after it has passed
the 2nd transport sensor.
P. 5 - 4
E320 PFP upper drawer transport jam (Paper not reach-
ing the 2nd transport sensor): The paper does not
reach the 2nd transport sensor after it has passed
the PFP upper drawer feed sensor.
P. 5 - 6
E330 PFP lower drawer transport jam (Paper not reach-
ing the registration sensor): The paper does not
reach the registration sensor after it has passed the
1st transport sensor.
P. 5 - 3
E340 PFP lower drawer transport jam (Paper not reach-
ing the 1st transport sensor): The paper does not
reach the 1st transport sensor after it has passed
the PFP lower drawer feed sensor.
P. 5 - 4
E350 PFP lower drawer transport jam (Paper not reach-
ing the 2nd transport sensor): The paper does not
reach the 2nd transport sensor after it has passed
the PFP upper drawer feed sensor.
P. 5 - 6
E360 PFP lower drawer transport jam (Paper not reach-
ing the PFP upper drawer feed sensor): The paper
does not reach the PFP upper drawer feed sensor
after it has passed the PFP lower drawer feed sen-
sor.
P. 5 - 7
Error code Classification Contents Troubleshooting
To Next Page
Loading...
