Toshiba e-STUDIO230 - Page 392

e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283 © 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 72
(3) Loosen the hinge screws at the front side.
Fig. 3-84
(4) Position the pins with the holes on the RADF
by moving it so that the pins fit into the holes
when the RADF is closed.
Fig. 3-85
(5) Tighten the left-hand hinge screw at the rear
side.
Fig. 3-86
05/11